MicoAir Optical Flow & Lidar Sensor MTF-01 PMW3901 optical flow sensor Compatible with INAV for RC FPV Racing Drone Quadcopter Multirotor

SpecificationsOutput Mode: UART 115200Output Interface: LVTTL (3.3V)Protocol: Micolink/Mavlink/MSPOutput Rate: 100HzFirmware Supported:INAVTOF Range: 8m@90% reflectance/600Lux; 5m@90% reflectance/60KLux;Center Wavelength: 850nmEmitting Half Angle: 3 °Dead Zone: 2cmRanging Accuracy: 4cm(<2m@90% reflectance);2%(>2m@90% reflectance)Optical Flow FOV: 42 °Max Speed Measurement: 7m/s@1m heightAmbient Light Demand of Optical Flow: >60LuxOptical Flow Working Distance: >8cmLight source: LEDPower Consumption: 500mWSupply voltage: 5VPhysicalMounting: 24.3 x 12mm, Φ2.5mmDimensions: 29.3 x 17 x 14.5 mmWeight: 4.5gPackage ListMTF-01 module * 120cm SH1.0 4PIN cable * 1 (single connector)15cm SH1.0-MX1.25-6P cable * 1 (for pixhawk2.4.8）15cm SH1.0-GH1.25-6P cable * 1 (for pixhawk4/5/6)

• MTF-01 features an integrated PMW3901 optical flow sensor and a high-performance TOF sensor, which can be used normally in outdoor sunlight environments
• Output Mode: UART, Output Frequency: 100Hz,Optical Flow: PMW3901
• TOF Range: 0.02-8m,Range Accuracy: 2%,Ambient Light Immunity: 70K Lux illumination
• Weighing only 4.5g and product size 29.3 * 17 * 15mm, it supports operating voltages of 4.0-5.5V and working temperatures from -10°C to 60°C, adaptable to a variety of environments
• 2IN1 sensor, multiple protocol built in,highly Compatible with INAV for RC FPV Racing Drone Quadcopter Multirotor